SEC3002 system represents the latest generation of addressable fire alarm control panel designed to comply with the latest versions of EN standard with qualities of simple installation, operation and easy maintenance. The wide range of SEC3002 configurations include standalone operation and networking with up to twenty panels for small to large sized applications.
C9091T Conventional Sounder Beacon can give audible and visual alarms after being connected to a DC24V power supply. It can be used with a bus-type fire alarm control panel through an output module. After receiving a start command given by the fire alarm control panel following an accident, the output module will start the Sounder Beacon. After that, the Sounder Beacon will give a dazzling visual alarm signal and a harsh audible alarm signal to remind the persons on the scene of the accident of the fact that a fire has occurred on the site quickly and the necessity to take related evacuation measures, thus preventing the fire accident from becoming a major one.
The Sounder Beacon may be used to give audible alarms and visual alarms at the scenes of accidents.It is applicable to places like high-rise residential buildings, public places, hotels, amusement buildings,factories, shopping centers, hospitals, schools, office buildings and stock exchanges, and particularly to the places with a low visibility or the possibility of generation of smoke.
Designed with an upper cover and a lower cover and installed on a detector base so it can be installed,commissioned and maintained conveniently.
Suitable for wall and ceiling-mount installation.
Providing 16 alarm tones
Comply with EN54-3 and EN54-23.
1. Mode of operation: Nonpolar two-wire system
2. Quiescent current: <0.6mA; Action current: <10mA
3. Capacity of the output control contact: <2A@DC30V
4. Operating environment: Temperature: - 10ºC ~ 55ºC ; relative humidity: ≤95% (40ºC ±2ºC , without condensation)
5. Operation indicator: The inspection indicator will blink once about every 12 seconds in the inspection status or remain lit in the output status; the input indicator will remain lit in the feedback status.
6. External dimensions: 86×86×40(mm)
7. Weight: about 140g(With base)
8. Executive standard: EN54-18