The UL listed Intelligent Fire Alarm System. D-TECTRON fire alarm systems can be configured with just a few devices for small size building applications, or networked with many devices to protect a large campus or a high-rise building. Simply add additional peripheral equipment to suit the application. Our advanced technology delivers supports the installers to do complete installation easily through simple steps. The inherent fault-tolerant characteristics of Analog/Address- able Technology boosts the reliability of D-TECTRON fire alarm systems. When combined with D-TECTRON smoke and heat detectors, these systems deliver a level of reliability and dependability for both small to medium size applications.
D-TECTRON DT122W and DT122R are Remote LCD Annunciator UL listed according to UL 864 for Fire Alarm Systems for indoor use.
The DT122W and DT122R have a 7” color LCD display and 800×480 resolutions, 6 auxiliary function keys and 9 LED indicators making it the most intuitive fire-alarm user interface.
In total, up to 4 annunciators can be connected to the DT106 FACP via CAN bus to form a fire emergency detection and notification network system.
|Operating Voltage||24VDC (Powered by Panel Aux. output)|
|Operating Temperature||32°F to 120°F (0°C to 49°C)|
|Operating Humidity||Up to 93% @ 90°F (32°C)|
|Weight||102.3 oz (2.9 kg)|
|Color||White / Red|
|Location||Indoor and dry|
Digital signal processor based design, fully configurable from the panel with password protection
7" color LCD displayand 800x480 resolutions
110-120VAC 60Hz (3A) or 220-240VAC 50Hz (1.5A)
Two 12V in series lead-acid battery set
4 Relay circuits supported
2 ClassA or 2Class B circuits on each Notification Output
Network Circuit: 252 addresses detectors and modules mix
The D-TECTRON Fire Alarm System complies with the following UL Standards and NFPA 72, International Building Code (IBC),
Fire Alarm System requirements: UL 864, 10th Edition, UL268\UL521\UL1638\UL1971\UL464\UL38
FM Approval Ongoing